Toward breast cancer resistance protein (BCRP) inhibitors: design, synthesis of a series of new simplified fumitremorgin C analogues

In this study, we report the design and synthesis of a series of new simplified fumitremorgin C analogues. The preliminary biological study indicated some of these simplified fumitremorgin C might be developed into breast cancer resistance inhibitors.     

丹麦生物质发电的现状和研究发展趋势

丹麦是世界上利用秸秆生物质燃烧发电技术开发、运行最好的国家，其经验值得中国借鉴。根据作者在丹麦对生物质燃烧发电的研究经历，系统地介绍了丹麦在秸秆生物质发电的经验、遇到的问题及相应的研究和今后的发展方向。     

化学复合镀Ni-P-PTFE镀层的组成分析

近年来化学复合镀技术在工业中应用日益广泛 ,本文运用ＳＥＭ、ＡＥＳ和ＸＰＳ等手段对用化学复合镀制得的Ｎｉ Ｐ ＰＴＦＥ镀层的结构和组分进行了分析 ,并就其耐腐蚀性能与前期得到的Ｎｉ Ｓｎ Ｐ[1 ] 、Ｃｕ Ｓｎ Ｐ[2 ] 、Ｎｉ Ｐ ＣｅＯ2 [3] 、Ｎｉ Ｐ ＳｉＯ2 [4] 镀层进行了比较 ,结果表明 :含量一定的ＰＴＦＥ(聚四氟乙烯 )的共存增强镀层的耐腐蚀性及镀层表面的润滑性。1　实验部分1 1　仪器日产Ｄ/ＭＡＸⅢＡ型Ｘ 射线衍射仪 ,铜靶 ,管压 2 5ｋＶ ,电流 1 0ｍＡ。国产ＪＪＣ 1型润滑湿角测量仪。美国ＰＥＲＫＩＮ ＥＬＭＥＲＰ…     

代铬刷镀层的耐腐蚀机理的考察

对新型的代铬刷镀层Ni-Fe-W-P-S进行了耐腐蚀性能机理的分析研究。用扫描电镜(SEM)、透射电镜(TEM)、扫描隧道显微镜(STM)、X射线衍射及电子能谱(XPS)等的分析表明，基体组织为非品结构是代铬刷镀层优异耐腐蚀性的主要原因.     

Y2O3薄膜处理对3Cr25Ni7N合金的抗高温氧化性能的影响

采用电沉积-热解法在3Cr25Ni7N合金表面制备了Y2O3薄膜,并研究了薄膜处理对合金在1000℃空气中的抗高温氧化性能的影响。氧化动力学曲线、SEM及XRD分析结果表明,Y2O3薄膜处理使合金表面氧化膜以尖晶石结构为主,氧化膜致密,有效地抑制了Cr2O3的挥发反应,且氧化膜与基体的附着性好,因此合金在高温下的抗氧化性能得到提高,这与氧化钇薄膜在较低温度下抗高温氧化性能提高的机制是不同的。在不同温度下,Y2O3薄膜处理均可以有效提高合金的抗高温氧化性能。     

Preparation and physical properties of flame retardant acrylic resin containing nano-sized aluminum hydroxide

Poly(methylmethacrylate) (PMMA) shows high strength and transparency but is a flammable material. In this study, the surface of aluminum hydroxide was modified with methacrylate containing phosphoric acid moieties before dispersion in MMA, and organic-inorganic nano-hybrid materials were obtained by bulk polymerization in the presence of the surface-modified aluminum hydroxide. The resulting hybrid materials retained the high transparency of PMMA, with transparency values similar to that of pure PMMA. Moreover, the flame resistance of the hybrid materials was improved in comparison with that of pure PMMA, with depression of the horizontal burning rate becoming a maximum at an inorganic content of 3 wt%. These results suggest that the use of aluminum hydroxide surface-modified with phosphoric acid groups is an efficient method for obtaining good performance fire-resistant polymer materials.     

钇对Ti-1100高温钛合金热稳定性和蠕变行为的影响

量了Ｔｉ１１００和Ｔｉ１１００／０１％Ｙ（质量分数）高温钛合金在６００℃／１００ｈ空气中暴露后的拉伸性能及在６００℃／１５０ＭＰａ／１００ｈ条件下的蠕变性能，利用透射电镜观察了合金室温及蠕变后的组织。结果表明，Ｔｉ１１００合金加入０１％的Ｙ后，由于原始β晶粒得到细化，明显改善了其热稳定性；固溶在基体中的硅原子阻碍位错滑移和攀移，使蠕变中的回复过程难于实现；稀土还抑制α２相的长大，所形成的氧化物也阻碍位错的运动。这些均有利于提高Ｔｉ１１００合金的抗蠕变性能。     

Preparation and swelling properties of hydrolysis-resistant superabsorbent composite based on acrylic acid and sodium bentonite

Abstract

A novel hydrolysis-resistant superabsorbent composite was prepared via the solution polymerization based on acrylic acid (AA) and sodium bentonite (SBT) as monomers, tetraallylammonium bromine (TAAB) as crosslinker and ammonium persulfate (APS) as initiator. The mechanism of polymerization and the structure of the superabsorbent polymer (SAP) were studied by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (X-ray), and scanning electron microscopy (SEM). The reaction conditions such as different mass ratios of APS to AA, TAAB to AA, SBT to AA, neutralization degree of AA were optimized by orthogonal experiment, and the influence of each reaction condition on the capacity of water absorption at 150?°C was investigated via single-factor controlled experiment. The hydrolysis resistance and swelling kinetics of the SAP were studied in different solutions at 150?°C. Compared to traditional SAPs, the SAP synthesized with TAAB as crosslinker performed a more excellent hydrolysis resistance and water absorbency capacity at high temperatures. The water absorbency in distilled water or 0.1?mol L^?1 NaCl solution could reach 392.6 and 145.2?g g^?1at 150?°C, respectively. The SAP maintaining high swelling capacity in the pH range of 5–9 indicated its wide application values in the acidic or alkaline environment at high temperature. In addition, the SAP exhibited good reusability which could still retain about 73% of its initial water absorbency after reswelling six times at 150?°C.     

STUDY ON STYRENE-BUTADIENE BLOCK COPOLYMER FOR THE MODIFICATI0N OF TIRE TREAD

This paper mainly deals with the design and synthesis of a novel styrene-butadieneblock copolymer. When this copolymer is used in the tread portion of tyres, it can improvewet skid resistance and reduce rolling resistance without sacrificing its general physical-mechanical properties. The visco-elastic curve of tire tread using the novel copolymer asits rubber portion was showed. Reactivity ratios for two monomers in the polymerizingsystem were calculated. The diagrams of differelitial, integral and finite difference calculithroughout the whole molecular chain were presented. The influence of the micro- andmacro-structure of the copolymer chain on wet skid resistance and rolling resistance wasdiscussed     

应变速率和电位对应力腐蚀裂纹扩展的影响

以滑移-溶解-再钝化模型为基础,推导出应力腐蚀裂纹扩展速率与裂尖应变速率和电位之间的理论公式.计算表明,在裂纹扩展速率与裂尖应变速率的关系曲线中有两个特征区域.裂纹扩展速率在区域I随裂尖应变速率增加而增大,而在区域II不随裂尖应变速率的改变而变化.用慢应变速率拉伸技术（SSRT）测量了304L不锈钢的裂纹增长速率.当电位控制在区域II的阳极区时,理论计算的裂纹扩展速率与实验得到的结果比较吻合.